SCREW WASHER COMPACTOR
This machine consists of a screw compactor for washing, compacting and conveying screened material and wet waste. The machine pushes the material through a pipeline or against a counter-pressure device, thus generating high forces capable of compacting and dewatering the material. A washing system fitted with nozzles is positioned along the conveyor route for draining the screenings as they move towards the compactor zone.
Our company, engaged in the water treatment sector for 10 years, boasts hundreds of installations both in Italy and abroad. We offer our clients the most innovative solutions and extensive knowledge in the field of screening machines.
We personally manufacture all our products according to ISO & CE standards, in full compliance with the Swedish steel processing tradition and quality.
We use exclusively certified materials and welding. Contact us to request a free quote.
MOD. X-S.COMP
The X-S.COMP shaftless screw compactor combines three operations: drainage, conveyance and compaction. The screenings enter the hopper and are moved to the compactor and dewatering zone by means of the shaftless screw conveyor, and then finally unloaded into a container. The water drained in the compactor zone is conveyed to the machine inlet where it can be discharged or reused for further treatments.
DRAINAGE, CONVEYANCE, COMPACTION AND DEWATERING
The machine consists of three sections:
The draining section, usually placed before the hopper where the majority of the water is discharged.
The conveying section, where the material is moved to the compacting/ dewatering section.
The compacting/ dewatering section where both material volume and weight reduction takes place (up to 50%).
The screw is connected directly to the drive system.
The machine, whose working range is 5 °C to 35 °C, can operate in manual and / or automatic mode according to the electrical panel settings and the relative operating requirements.
To inquire about the construction of a screw compactor, feel free to contact us.
