Belt conveyor


The belt conveyor model X-BELT.CONV is used to convey in a dumpster or in a specific part of the plant materials discharged from the screens, filters or machinery in general. Thanks to a special belt made using a dual cure and a scraping blade, the belt, every complete lap, come back to the collection point, clean without residue in order to start a new cycle of work. In order to avoid lateral losses of material, the frame is suitably bent so as to accommodate the scraps and keep over the tape. The material to be conveyed is deposited on the belt, which, slowly turning it carries up at the end of the machine where by gravity falls in a dumpster or in a special space. At this point, the belt rotates in such a way to return to the point of starting a new load cycle. To avoid that the tape work dirty, under the discharge zone is applied scraper blade.


  • A supporting structure made of Stainless Steel AISI 304 or AISI 316
  • Two or more support legs to the same extent in case in which the machine was horizontal, of different height in the case in which it was inclined realized in Stainless steel AISI 304 or AISI 316
  • A special canvas continuous dual cure
  • A motor of the type with worm and helical gearboxes. 220/380 Volt, 50 Hz three-phase, IP54, class F.
  • Feeding rollers properly sized.